Rezultati pretrage za: 'combine us now'

Receiving and transmitting video/power over UTP cable without using power supply.
Max transmission distance: 600m
Dimensions:43*20*2.1mm

Heavy-Duty Outdoor Swivel Bracket (MG-SB85)
Designed for use with both the DG85 and the MG-PMD85 outdoor detectors, the MG-SB85’s design allows you to mount and orient the detectors on a ceiling or wall surface (flat/corner mount), ensuring optimal coverage of the protected area.

With the use of an innovative T-joint, the MG-SB85 can position the outdoor detectors along two axes. This allows for more maneuverability and better detector positioning. The MG-SB85 also employs a cap lock that prevents unauthorized people from changing the detector’s position.

Power supply: No need additional power supply.
Transmission effect: Real-time transmission video without compression, no delay, strong anti-interference.
Transmission distance: VGA video signal high fidelity transmission 75M (max)
Main functions: Use single UTP (CAT-5E and CAT-6) transmit 1-ch video, lower cost.

Supports load up to 20 kg |
Tilt: +/-25° | Swivel: 360° |
Up to 90° can also be used on scewed ceilings |
Hole spacing universally adjustable (hole circle diameter: max.37 cm) |
Distance to ceiling: 490 - 690 mm |

Features
 
    Impact and temperature resistant casing (-35°C to 50°C / -31°F to 122°F)
    Patented Digital Motion Detection
    Extremely reliable and false-alarm free
    Dual Optical Filtering System
    UV protected lens
    Dual optics (2 dual opposed element sensors)
    Digital Dual Opposed Detection
    Multi-level sensitivity adjustment
    Two operational modes (Bus or Relay operation)
    Can be used with the Heavy Duty Outdoor Swivel Bracket (MG-SB85W). Click here for more information.

MikroTik (BaseBox2) Outdoor 2.4Ghz 802.11b/g/n wireless device in a weatherproof enclosure with two SMA connectors for antenas and a cable hood for protection against moisture. Max TX Power 30 dBm, Atheros AR9342 600MHz CPU, 64MB DDR onboard memory, (1) 1000Mbit Gigabit RJ45 port, (1) miniPCIe slot for adding an additional 802.11 wireless card or 3G, (1) USB 2.0 port, (2)RP-SMA Female Connectors (outside thread) to connect extrenal antenas. Power Option: PoE: 8-30V DC on Ether1 (Non 802.3af). Consumption: 14W at 24V, Includes RB912 outdoor unit, 24V 0.8A Power Adapter, PoE injector, mounting loop, DIN rail mount, mounting ring, RouterOS, Level4 license. Also available are three additional places for antenna connectors, in case you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem. Wireless Modes AP/Wireless Client/Bridge. Dimension 246x135x50mm

Features
- Modern VI (line-interactive) technology against power failure and dangerous overvoltage
- Automatic voltage regulation against mains voltage deviations (AVR)
- Easy installation ensured by cables supplied and optimum operation
- Use of sealed, maintenance-free lead-acid batteries with exhaustive discharge protection
- USB port communication interface
- Fully fledged "CompuWatch" plug & play software

· 640*512 VOx uncooled thermal sensor technology
· Athermalized Lens(thermal),Focus-free
· 1/1.9” 2Megapixel progressive scan Exmor CMOS
· Powerful 30x optical zoom
· Support Fire detect&alarm
· Max 160°/s pan speed, 360° endless pan rotation
· Up to 300 presets, 5 auto scan, 8 tour, 5 pattern
· 7/2 alarm in/out
· Micro SD memory, IP66